About InnoVenture

  • ABOUT INNOVENTURE
  • AY2018/2019 PROGRAMME
  • CURRENT STAKEHOLDERS
  • PAST STAKEHOLDERS
  • FOR FUTURE STAKEHOLDERS
  • FAQ

ABOUT INNOVENTURE

IEL’s core programme for undergraduates is InnoVenture. (Module code: EG1603 / EG2603 Technopreneurship and Incubation Programme).

InnoVenture is an immersive programme, students will experience the real-life complexity in brainstorming, designing, prototyping and commercialising their solutions.

Students will work in teams to select an engineering problem statement that is supported by a stakeholder which can be an MNC, an SME, a government or public-sector organisation, or even a non-profit./p>

Through hands-on bootcamps and active mentorship with experienced professionals, teams will design, prototype and pitch viable solutions that have real impact. Selected teams will be provided with prototyping funds to see solutions come to life. Successful potential outcomes can be start-ups based on the solutions, internship opportunities at stakeholder organisations, or stakeholder continuation of the project.

InnoVenture’s experiential nature provide students opportunities to apply technical skills to real engineering problems, while developing business and soft skills through active engagement with industry.

InnoVenture is open to students from all disciplines at NUS.

Undergraduate students can earn credits (2MC + 2MC) through InnoVenture. To be awarded the credits you must attend all workshops in each phase, complete the short reflection assignments after each workshop, and pitch successfully at IdeaLaunch and/or DemoDay. Please check beforehand that you can commit to the various workshops by viewing the schedule.

ADJUNCT ASSOCIATE PROFESSOR VINOD VASNANI
Programme Lead
INSTRUCTOR
LIM HONG WEE
Prototyping Lead
JEROME WONG ZHEN HAO
Student Co-ordinator

AY2018/2019 PROGRAMME

Programme update: 22 Teams, 90 Students

Event Date, Time & Venue Content
Maker Workshop 26 January 2019

830AM-500PM

TechHub@E2: E2 03 02

  • Various maker workshops to enhance maker skills
  • Prototyping mentors will be introduced
Prototyping Mentor Sessions Wednesday afternoons

300 – 600PM

(specific slots will be provided to groups)

Business Workshop 2 March 2019

830-1100AM

TechHub@E2: E2 03 02

  • Business models and financing
  • Business mentors will be introduced
Leadership Workshop 2 March 2019

1100AM-100PM

TechHub@E2: E2 03 02

  • Self and shared leadership
  • Understanding yourself
  • Using team development tools
Business Mentor Sessions Wednesday afternoons

300 – 600PM

(specific slots will be provided to groups)

Presentations at E-HIVE! 17 April 2019 More details to be provided later
Event Date, Time & Venue Content
Kick-off 21 August 2018

1200-130PM

Introduction of Challenge and Problem Statements to participants.

Start of registration/team signups

Customer Focus Workshop 1 September 2018

900AM-100PM

Focuses on identifying your customer, and how to interview and gain information from them for solutioning.

Interaction with companies!

Effective Decision Making 8 September 2018

900AM-100PM

Focuses on team formation & dynamics to ensure that your team is ready for the challenge!
Solutioning Workshop 15 September 2018

900AM-100PM

Focuses on creativity tools & tricks to help you in your solutioning!
Immersions TBD Field trips to participating companies to experience the setting in which the problem statement applies (only for selected problem statements
Business & Presenting Workshop 20 October 2018

900AM-100PM

More details to be provided later
Presentations at E-HIVE! 14 November 2018

TBD

All teams will present their solutions to a panel!

Back to the top

CURRENT STAKEHOLDERS

Champs Logo

Reducing clean water wastage in homes. Overall (Singapore) clean water wastage due to excess/non-controlled water outputs (taps, showers, etc..) in the home.

Overview: Water is a valuable and costly resource – even more so in Singapore. Homeowners are aware of the need to save water both for the environment and utility cost, but so far current water saving solutions do not provide the same level of experience. Consumers are unwilling to sacrifice the familiar water pressure and water flow output that they are used to for showering or washing dishes etc.

Challenge: The challenge is to provide new water savings solutions for use in households. It can either be a new water saving system, device or an add-on. The target is to reduce the normal water output by 70%, while maintaining good pressure and water flow output. For add-ons, the cost of the device must be below $7 SGD to be effectively marketed and adopted by the mass end consumers. New systems or devices can be priced in a similar range to existing systems or devices.

For this challenge:

  • You must clearly define the target water outlet in the home
  • Preferably, the solution is able to provide for all general water uses, but it is also acceptable to provide a solution for a specific use of water (i.e. only showering, only cleaning dishes…etc)
  • Need to first satisfy the end consumer with good water pressure and good water flow output, to have a chance for them to switch. Once satisfied, then the cost angle can be considered.

innosparks-logo

Overview: Wheelchair users in Singapore today are plagued with mobility issues that are not faced by the common population. An estimated 170,000 flats in Singapore have multiple steps at the entrance of the house, and this poses a great challenge to wheelchair users. In addition, it may not always be possible to install ramps to all these homes. As a result, wheelchair users in these circumstances tend to stay at home. As the population continues to age, the number of wheelchair users in Singapore is expected to rise. Hence, to build a more inclusive community, more needs to be done to address issues faced wheelchair users, to enable them to be more independent and integrate better with the society.

Challenge: Innosparks is interested in improving the mobility of wheelchair users by building a device that enables them to overcome the small flight of steps outside their houses. This device should be safe and straightforward to use, and can be operated by a caretaker. The device should also not be physically demanding to operate. The device should require minimal maintenance and would be preferred to be mechanically operated. It can be assumed that the device can be stored outside the house.

For this challenge

  • The maximum height of steps to overcome is 50cm; the maximum depth of the steps is 80cm; the width of the door is 83cm
  • It only allows the usage of manual wheelchairs and support a total weight of 150kg
  • Minimal to no renovation should be done to the users’ house
  • Cost of the device is targeted below S$500.

MMI official logo

Overview: In order to expedite resuscitation and improve its efficacy, resuscitation drugs and equipment have to be readily available. To facilitate this, the list and layout of the resuscitation drugs and equipment in the resuscitation trolley (E-trolley) have been standardized in all SAF Medical Centres. All drawers of the E-trolley are sealed at all times with a serialized cable tie, in addition to the physical lock. Regular checks of the resuscitation drugs and equipment are carried by the Duty Medic in the medical centres. After a resuscitation case, the E-trolley will be re-stocked to full quantity as soon as possible.

Challenge: During unscheduled audit checks, E-trolleys across medical centres are found with items that may be expired / incorrect / not available / or in the incorrect drawers. SAF Medical Centres are looking for a method to help with stocktaking of the drawers. The person doing the stocktaking should:

  • Be able to see if all items that are supposed to be in the trolley, are in the trolley;
  • Be able to see if all items are in the right place in the trolley;
  • Able to track the expiration date and alert if the expiration date has passed of the specific item

For this challenge:

  • Existing E-trolley dimensions:
    • Drawer 1: 58.5cm X 49.1cm X 10.5cm (External), 57cm X 49.1cm X 9.5cm (Internal)
    • Drawer 2: 58.5cm X 49.1cm X 8.0cm (External), 57cm X 49.1cm X 6.8cm (Internal)
  • Trolleys are checked ≥ 01 time per week and after each resuscitation case.
  • There are 2 types of drawers (example pictures can be found on the website) – you may choose either drawer or attempt to provide a solution for both
    • You may change the layout of the trays and positioning of the items if necessary
  • Solutions can be either complete redesigns of the trolleys OR external and/or internal scanning technologies keeping the trolley intact OR a combination of both.
  • The solution can be automated or manual – If manual, then the stocktaking should be able to be done in under 3 minutes.

Fig. 1: Corresponding Drawer in the E-Trolley.

MMI Fig 1B

Fig. 2: Corresponding Drawer in the E-Trolley.

MMI Fig 2B

surbana Jurong

Continuous Condition Monitoring of Cranes

Overview: Cranes are used extensively in construction and port operations. At present, cranes are equipped with several fail-safe mechanisms that prevent unsafe operation. However, these measures are not fail-proof. A different approach to this can be in the continuous monitoring of the condition of the crane. A good first step will be to measure the strain that the equipment is subject to daily. This will provide an indication to the impact of daily operations on the health of the crane.

Challenge: Surbana Technologies is interested to develop a strain monitoring solution that is easy to retrofit on existing cranes. The focus of the solution will be to provide accurate strain measuring of different components in the crane. Ideally, the solution will provide wireless communications for real-time/on-demand monitoring.

Teams can start with the hinges, as these are the components subjected to the greatest stresses; however, teams are open to look into any other areas as well.

For this challenge:

  • The teams may develop the solution for any crane type (construction or port), but the team will have to customize the solution for the selected crane type
  • The hardware solution should be industrial grade, e., able to withstand external environments
  • The total cost of the solution should be capped at $5,000 per crane, where reasonable
  • The teams are welcome to develop a data science solution to calibrate and detect the condition of the cranes, based on the strain measurements

Back to the top

FOR FUTURE STAKEHOLDERS

InnoVenture - Call for Problem Statements

Back to the top

FREQUENTLY ASKED QUESTIONS

InnoVenture is the technopreneurship challenge for students at the Faculty of Engineering, National University of Singapore. The challenge is organised by the Institute for Engineering Leadership.

Anyone who is enrolled at NUS can sign up, irrespective of their faculty or whether they are studying Bachelors, Masters or PhD.

You can sign up individually! We will help you to form a team with other individual signups. Do join us for the Kick-off and first workshop; a great opportunity to meet others and form a team! Alternatively you can use our InnoVenture Facebook page or IVLE forum to find team members!

On average a 150+ students participate every year from across the university. InnoVenture is open to all faculties at NUS. Teams are encouraged to be as diverse as possible to enhance the creativity in the team. Teams are 2-4 people.

InnoVenture is open to all faculties at NUS. You are encouraged to form multi-disciplinary teams as much as possible to enhance creativity and skillset within the team.

In the past years we’ve had the honour of a great number of companies involved in InnoVenture. Companies such as PUB, Total, Nestle, BP, Tan Tock Seng Hospital, Infineon and many more! Past Participating Companies links for more information. For this year’s problem statements please find the Current Stakeholders tab.

Teams are minimum 2, maximum 4 – cross-disciplinary and cross-graduate teams are highly encouraged to enhance creativity and skillset within the team.

We highly recommend forming a team with varied backgrounds. The past winners of InnoVenture were multi-disciplinary!

If you are enrolled under the InnoVenture programme for credits then it is mandatory for you to attend all workshops, complete all reflection assignment and pitch at IdeaLaunch and/or DemoDay. More information about the will be provided at the Kick-off and first workshop.

The workshops are voluntary for all to attend. We highly encourage that you DO attend all workshops as they are invaluable for your success! During the workshops you will get access to the company representatives, experienced industry professionals, entrepreneurs and other students!

This is a yearlong challenge. Phase 1 of InnoVenture runs from August till November. All teams will advance to the 2nd Phase running from November – March the following year.

INNOVENTURE EVENTS & NEWS

fb


Screen Shot 2017-07-12 at 12.19.30 AM